Product designation				Power contactor
Product type designation				BFK38
Contact characteristics
Number of poles			Nr.	3
Rated insulation voltage Ui IEC/EN			V	690
Rated impulse withstand voltage Uimp			kV	6
Operational frequency
		min	Hz	25
		max	Hz	400
IEC Conventional free air thermal current Ith			A	56
Rated operational power AC-6b (T≤40°C)
		230V	kvar	17
		400V	kvar	30
		440…480V	kvar	33
		690V	kvar	36
Short-time allowable current for 10s (IEC/EN60947-1)			A	320
Protection fuse
		gG (IEC)	A	63
Making capacity (RMS value)			A	380
Breaking capacity at voltage
		440V	A	304
		500V	A	240
		690V	A	192
Resistance per pole (average value)			mΩ	2
Power dissipation per pole (average value)
		Ith	W	6
Tightening torque for terminals
		min	Nm	2.5
		max	Nm	3
		min	Ibin	1.8
		max	Ibin	2.2
Tightening torque for coil terminal
		min	Nm	0.8
		max	Nm	1
		min	Ibin	0.59
		max	Ibin	0.74
Max number of wires simultaneously connectable			Nr.	2
Conductor section
	AWG/Kcmil
		max		6
	Flexible w/o lug conductor section
		min	mm²	2.5
		max	mm²	16
	Flexible c/w lug conductor section
		min	mm²	1
		max	mm²	10
	Flexible with insulated spade lug conductor section
		min	mm²	1
		max	mm²	10
Power terminal protection according to IEC/EN 60529				IP20 when properly wired
Mechanical features
Operating position
		normal		Vertical plan
		allowable		±30°
Fixing				Screw / DIN rail 35mm
Weight			g	400
Conductor section
	AWG/kcmil conductor section
		max		6
Operations
Mechanical life			cycles	20000000
Electrical life			cycles	1400000
Safety related data
Performance level B10d according to EN/ISO 13489-1
		rated load	cycles	400000
		mechanical load	cycles	20000000
EMC compatibility				yes
AC coil operating
Rated AC voltage at 50/60Hz			V	230
AC operating voltage
	of 50/60Hz coil powered at 50Hz
		pick-up
		min	%Us	80
		max	%Us	110
		drop-out
		min	%Us	20
		max	%Us	55
	of 50/60Hz coil powered at 60Hz
		pick-up
		min	%Us	85
		max	%Us	110
		drop-out
		min	%Us	20
		max	%Us	55
AC average coil consumption at 20°C
	of 50/60Hz coil powered at 50Hz
		in-rush	VA	75
		holding	VA	9
	of 50/60Hz coil powered at 60Hz
		in-rush	VA	70
		holding	VA	7
	of 60Hz coil powered at 60Hz
		in-rush	VA	75
		holding	VA	9
Dissipation at holding ≤20°C 50Hz			W	2.5
Max cycles frequency
Mechanical operation			cycles/h	3600
Operating times
Average time for Us control
	in AC
		Closing NO
		min	ms	8
		max	ms	24
		Opening NO
		min	ms	5
		max	ms	15
		Closing NC
		min	ms	9
		max	ms	20
UL technical data
General USE
	Contactor
		AC current	A	56
Ambient conditions
Temperature
	Operating temperature
		min	°C	-50
		max	°C	70
	Storage temperature
		min	°C	-60
		max	°C	80
Max altitude			m	3000
Resistance & Protection
Pollution degree				3
ETIM classification
ETIM 8.0				EC001079 - Capacitor contactor

Documentos

Motor starting solutions (eng)
PD116GB02_22

Contactores especiales para regulacion factor potencia BFK... (esp)
I190IGBDEF04_21

Certificados

CCC
EAC
cULus

Conformidad

IEC/EN/BS 60947-1
IEC/EN/BS 60947-4-1
UL 60947-1
UL 60947-4-1
CSA C22.2 n° 60947-1
CSA C22.2 n° 60947-4-1

Productos > Contactores

BFK3800A230

Comparar

Contactor para corrección del factor de potencia con circuito de control en AC, tipo BFK (con resistencias limitadoras), potencia nominal máxima (IEC) 400V = 30kvar, bobina 230VAC 50/60Hz

Tipo de producto: Contactores para corrección del factor de potencia con circuito de control AC
Número de polos: 3
Tipo de bobina: Bobina de CA 50/60 Hz
Tensión nominal de bobina [V]: 230
Potencia IEC a 400V [kvar]: 30
Tipo de montaje: Tornillo / Carril DIN 35mm

Código de pedido	BFK3800A230
Peso [g]	482
Unidades de embalaje	10
Cantidad de pedido multi-embalaje	10
Dimensiones de embalaje [mm]	265X265X135
Volumen [cm³]	948,038
Código de barras [EAN13]	8013975164365
Código HS	85365080