Product designation				Power contactor
Product type designation				BF18
Contact characteristics
Number of poles			Nr.	3
Rated insulation voltage Ui IEC/EN			V	690
Rated impulse withstand voltage Uimp			kV	6
Operational frequency
		min	Hz	25
		max	Hz	400
IEC Conventional free air thermal current Ith			A	32
Operational current Ie
		AC-1 (≤40°C)	A	32
		AC-1 (≤55°C)	A	26
		AC-1 (≤70°C)	A	23
		AC-3 (≤440V ≤55°C)	A	18
		AC-4 (400V)	A	8.5
Rated operational power AC-3 (T≤55°C)
		230V	kW	4
		400V	kW	7.5
		415V	kW	9
		440V	kW	9
		500V	kW	10
		690V	kW	10
Rated operational power AC-1 (T≤40°C)
		230V	kW	12
		400V	kW	21
		500V	kW	26
		690V	kW	36
IEC max current Ie in DC1 with L/R ≤ 1ms with 1 poles in series
		≤24V	A	17
		48V	A	15
		75V	A	15
		110V	A	6
		220V	A	–
IEC max current Ie in DC1 with L/R ≤ 1ms with 2 poles in series
		≤24V	A	20
		48V	A	20
		75V	A	20
		110V	A	13
		220V	A	1
IEC max current Ie in DC1 with L/R ≤ 1ms with 3 poles in series
		≤24V	A	22
		48V	A	22
		75V	A	20
		110V	A	16
		220V	A	11
IEC max current Ie in DC1 with L/R ≤ 1ms with 4 poles in series
		≤24V	A	22
		48V	A	22
		75V	A	20
		110V	A	18
		220V	A	13
IEC max current Ie in DC3-DC5 with L/R ≤ 15ms with 1 poles in series
		≤24V	A	12
		48V	A	11
		75V	A	11
		110V	A	2
		220V	A	–
IEC max current Ie in DC3-DC5 with L/R ≤ 15ms with 2 poles in series
		≤24V	A	15
		48V	A	13
		75V	A	13
		110V	A	8
		220V	A	2
IEC max current Ie in DC3-DC5 with L/R ≤ 15ms with 3 poles in series
		≤24V	A	18
		48V	A	18
		75V	A	16
		110V	A	12
		220V	A	6
IEC max current Ie in DC3-DC5 with L/R ≤ 15ms with 4 poles in series
		≤24V	A	18
		48V	A	18
		75V	A	16
		110V	A	13
		220V	A	8
Short-time allowable current for 10s (IEC/EN60947-1)			A	200
Protection fuse
		gG (IEC)	A	32
		aM (IEC)	A	20
Making capacity (RMS value)			A	180
Breaking capacity at voltage
		440V	A	144
		500V	A	120
		690V	A	94
Resistance per pole (average value)			mΩ	2.5
Power dissipation per pole (average value)
		Ith	W	2.6
		AC-3	W	0.8
Tightening torque for terminals
		min	Nm	1.5
		max	Nm	1.8
		min	Ibin	1.1
		max	Ibin	1.5
Tightening torque for coil terminal
		min	Nm	0.8
		max	Nm	1
		min	Ibin	0.8
		max	Ibin	0.74
Max number of wires simultaneously connectable			Nr.	2
Conductor section
	AWG/Kcmil
		max		10
	Flexible w/o lug conductor section
		min	mm²	1
		max	mm²	6
	Flexible c/w lug conductor section
		min	mm²	1
		max	mm²	4
	Flexible with insulated spade lug conductor section
		min	mm²	1
		max	mm²	4
Power terminal protection according to IEC/EN 60529				IP20 when properly wired
Mechanical features
Operating position
		normal		Vertical plan
		allowable		±30°
Fixing				Screw / DIN rail 35mm
Weight			g	358
Conductor section
	AWG/kcmil conductor section
		max		10
Auxiliary contact characteristics
Thermal current Ith			A	10
IEC/EN 60947-5-1 designation				A600 - P600
Operating current AC15
		230V	A	3
		400V	A	1.9
		500V	A	1.4
Operating current DC12
		110V	A	5.7
Operating current DC13
		24V	A	5.7
		48V	A	2.9
		60V	A	2.3
		110V	A	1.25
		125V	A	1.1
		220V	A	0.55
		600V	A	0.2
Operations
Mechanical life			cycles	20000000
Electrical life			cycles	1600000
Safety related data
Performance level B10d according to EN/ISO 13489-1
		rated load	cycles	1600000
		mechanical load	cycles	20000000
Mirror contats according to IEC/EN 609474-4-1				yes
EMC compatibility				yes
AC coil operating
Rated AC voltage at 60Hz			V	230
AC operating voltage
	of 60Hz coil powered at 60Hz
		pick-up
		min	%Us	80
		max	%Us	110
		drop-out
		min	%Us	20
		max	%Us	55
AC average coil consumption at 20°C
	of 60Hz coil powered at 60Hz
		in-rush	VA	75
		holding	VA	9
Dissipation at holding ≤20°C 50Hz			W	2.5
Max cycles frequency
Mechanical operation			cycles/h	3600
Operating times
Average time for Us control
	in AC
		Closing NO
		min	ms	8
		max	ms	24
		Opening NO
		min	ms	10
		max	ms	20
		Closing NC
		min	ms	14
		max	ms	28
		Opening NC
		min	ms	7
		max	ms	18
UL technical data
Full-load current (FLA) for three-phase AC motor
		at 480V	A	14
		at 600V	A	17
Yielded mechanical performance
	for single-phase AC motor
		110/120V	HP	1
		230V	HP	3
	for three-phase AC motor
		200/208V	HP	5
		220/230V	HP	5
		460/480V	HP	10
		575/600V	HP	15
General USE
	Contactor
		AC current	A	32
	Auxiliary contacts
		AC voltage	V	600
		AC current	A	10
		DC voltage	V	250
		DC current	A	1
Short-circuit protection fuse, 600V
	High fault
		Short circuit current	kA	100
		Fuse rating	A	60
		Fuse class		J
	Standard fault
		Short circuit current	kA	5
		Fuse rating	A	80
Contact rating of auxiliary contacts according to UL				A600 - P600
Ambient conditions
Temperature
	Operating temperature
		min	°C	-50
		max	°C	70
	Storage temperature
		min	°C	-60
		max	°C	80
Max altitude			m	3000
Resistance & Protection
Pollution degree				3
ETIM classification
ETIM 8.0				EC000066 - Power contactor, AC switching

Documentos

02 - Contactores (esp)

Contactores BF00, BF09, BF12, BF18, BF25, BF26, BF32, BF38 (esp)
I616IGBDFE10_19

Certificados

CCC
EAC
cULus

Conformidad

IEC/EN/BS 60947-1
IEC/EN/BS 60947-4-1
IEC/EN/BS 60335-1
UL 60947-1
UL 60947-4-1
CSA C22.2 n° 60947-1
CSA C22.2 n° 60947-4-1

Productos > Contactores

BF1801A230V260

Comparar

Three-pole contactor, IEC operating current Ie (AC3) = 18A, AC coil 50/60Hz, 230VAC, 1NC auxiliary contact - IEC/EN/BS 60335-1

Tipo de producto: Contactores
Número de polos: 3
Tipo de bobina: Bobina de CA 50/60 Hz
Tensión nominal de bobina [V]: 230
Corriente de funcionamiento IEC Ith (AC1) [A]: 32
Corriente nominal y potencia Ie (AC3) 400V [A/Kw]: 18A / 7.5Kw
Clasificaciones de potencia UL/CSA 480 V [HP]: 10
Tipo de contacto auxiliar incorporado: 1NC
Tipo de montaje: Tornillo / Carril DIN 35mm

Código de pedido	BF1801A230V260
Peso [g]
Unidades de embalaje
Cantidad de pedido multi-embalaje
Dimensiones de embalaje [mm]
Volumen [cm³]
Código de barras [EAN13]
Código HS

Hoja técnica

360°

Dimensiones

Esquemas eléctricos

Video

SELECCIONAR PAÍS

360°

Dimensiones

Esquemas eléctricos

Hoja técnica - BF1801A230V260

Documentos

Catálogo

Folletos

Instrucciones técnicas

CAD

Certificados

Faq

Tutorials

Certificados

Conformidad

BF1801A230V260