Product designation				Thyristor modules
Product type designation				DCTL
General characteristics
Rated voltage			V	600…690
Operating voltage range				340…759
Rated frequency			Hz	50/60
Operating frequency range			Hz	45…65
Rated current (Ie)			A	29
Step power at
		400VAC	kvar	30
		440VAC	kvar	22
		480VAC	kvar	24
		525VAC	kvar	26
		600VAC	kvar	30
		690VAC	kvar	30
Peak inverse voltage (PIV)			VAC	3600
Number of controlled phases			Nr.	2
Control circuit				12-24VDC input or free-voltage input or via RS485 serial port (with optional card EXC1042 in combination with controller DCRG8F + EXP1012)
Auxiliary supply
Rated auxiliary supply voltage Us
	AC
		min	VAC	100
		Max	VAC	240
Auxiliary rated frequency			Hz	50/60
Power consumption Max			VA	14.1
Power dissipation Max			W	5.8
Control input
Terminals				CONTROL +/-
Rated voltage				12-24VDC
Operating range				8…30VDC
Digital inputs
Terminals				C-IN1
Applied voltage at contact (internal)				5VDC
Input current			mA	≤10
Low input signal			VDC	≤0.8
High input signal			VDC	≥3.2
Input signal delay			ms	≥50
NTC probe input
Terminals				NTC-NTC
Sensor type				NTC (ordering code NTC01)
Measuring range			°C	-25…+85
Maximum connection lenght			mt	3
Fan power supply
Terminals				FAN +/-
Supply voltage (internal)				5VDC (provided by DCTL)
Fan type				2 built-in fans type EXP8004
Relay outputs
Number of relay output			Nr.	1
Contact arrangement				1 C/O-SPDT
Rated current				NO contact: AC1 5A 250VAC / 5A 30VDC NC contact: AC1 3A 250VAC / 3A 30VDC
UL/CSA and IEC/EN 60947-5-1 designation				D300
Maximum switching voltage			VAC	250
Electrical life (with rated load)			cycles	NO contact: 10x10³ NC contact: 20x10³
Mechanical life			cycles	10⁷
Insulations
Rated insulation voltage Ui IEC/EN			V	690
Rated impulse withstand voltage Uimp			kV	6
Connections - power terminals
Type of terminal				Fixed - double lock clamp
Conductor cross section
		min	mm²	2 x 2.5
		Max	mm²	2 x 35
		min	AWG	2 x 18
		Max	AWG	2 x 2
Tightening torque (Max)
			Nm	5.5-6.5
			lbin/lbft	4.06-4.79 Ibft
Connections - relay output
Type of terminal				Screw
Conductor cross section
		min	mm²	0.2
		Max	mm²	4
		min	AWG	26
		Max	AWG	10
Tightening torque (Max)
			Nm	0.8
			lbin	7
Connections - fan and digital input
Type of terminal				Screw
Conductor cross section
		min	mm²	0.2
		Max	mm²	2.5
		min	AWG	24
		Max	AWG	12
Tightening torque (Max)
			Nm	0.44
			lbin	4
Ambient conditions
Temperature
	Operating temperature
		min	°C	-20
		max	°C	+45°C without derating (up to 55°C with derating)
	Storage temperature
		min	°C	-30
		max	°C	+80
Relative humidity			%	<80%
Maximum Pollution degree				2
Overvoltage category				III
Max altitude			m	2000m wihtout derating
Climatic sequence				Z/ABDM (IEC/EN 60068-2-61)
Shock resistance				15g (IEC/EN 60068-2-27)
Vibration resistance				0.7g (IEC/EN 60068-2-6)
Housing
Execution				Internal panel version
Material				Polycarbonate
Mounting				Screw fixing or DIN-rail (IEC/EN 60715) with optional accessory EXP8003
Degree of protection				IP00
Dimensions (W x H x D)			mm	95 x 226 x 182
Weight			g	2840
ETIM classification
ETIM 8.0				EC002055 - Solid state relay

Документы

26 - Регуляторы коэффициента мощности и тиристорные модули (rus)

Dynamic power factor correction (eng)
PD133GB07_20

Сертификаты

cULus

Соответствие

IEC/EN 60947-4-3
IEC/EN 61000-6-2
IEC/EN 61000-6-4

Изделия > Контроллеры компенсации реактивной мощности и тиристорные модули

DCTLA6900300

Сравнить

Thyristor module, 30kvar at 690VAC, rated operating voltage 600...690VAC, with current control

Тип продукта: Тиристорные модули
Номинальное напряжение [В переменного тока]: 600…690
Шаговая мощность [кВАр]: 30

Код заказа	DCTLA6900300
Вес [г]	3020
Количество в упаковке	1
Кратное количество коробок в заказе	1
Размеры упаковки [мм]	232X107X200
Объем [cm³]	4964,8
Штрих-код [EAN13]	8013975238189
Код ТНВД	85371098