Product designation				Electric fire pump controller, supply 24VAC or 100-240VAC, built-in RS485, expandable with EXP.. Modules
Product type designation				FFL…EP
Auxiliary supply
Rated auxil. supply voltage				24VAC/110...240VAC
Operating auxil. supply voltage range				19.2…28.8VAC / 90…264VAC
Operating frequency range			Hz	45…66Hz
Voltage inputs
Rated voltage Us
		min	VAC	100
		Max	VAC	600
Measurement range			V	100…720
Frequency range			Hz	45...66
NTC probe input
Sensor type				NTC (LOVATO code NTC01)
Measuring range			°C	-40...+85
Maximum connection lenght			mt	3m
Digital inputs
Number of digital input			Nr.	8
Digital input type				Negative
Digital input current			mA	≤6
High digital input signal			V	≥4.9V (typical 3.8V)
Low digital input signal			V	≤1.25V (typical 2.3V)
Digital input signal delay			ms	≥50
Current inputs
Rated current (Ie)			A	/1A or /5A
Relay outputs
Number of relay output			Nr.	9
Mechanical endurance				10⁷
Electrical endurance				10⁵
Static Outputs
Number of static output				1 (OUT10)
Static output type				NO
Operating voltage			V	10...30VDC
Maximum current			mA	50mA
RS485 serial interface
Interface type				Isolated RS485 serial interface
Baud rate			bps	1200...115200
Insulation voltage (RS485-Vbatt)				1kVDC
Connections
Type of terminal				Removable screw-type
Conductor cross section
	AWG/Kcmil
		min	AWG	24
		Max	AWG	12
	IEC
		min	mm²	0.2
		Max	mm²	2.5
Tightening torque for terminals
		max	Nm	0.56
		max	Ibin	5
Ambient conditions
Temperature
	Operating temperature
		min	°C	-25
		max	°C	+70
	Storage temperature
		min	°C	-30
		max	°C	+80
Relative humidity			%	<80% (IEC/EN 60068-2-78)
Housing
Execution				Flush-mount
Material				Polycarbonate
Degree of protection				IP65 Frontal; IP20 on terminals
Dimensions (W x H x D)			mm	240 x 180 x 43.9
Weight			g	980
ETIM classification
ETIM 8.0				EC002685 - Central fire alarm control panel

Documents

29 - Fire pump controllers (eng)

Fire pump controllers (eng)
PD122GB10_20

Electric fire pump controllers (EN12845) FFL700EP, FFL800EP. Installation manual (eng)
I559GBIDFE10_20
Electric fire pump controllers (EN12845) FFL700EP, FFL800EP. Instructions manual (eng)
I560IGB05_23
Electric fire pump controllers (EN12845) FFL700EP, FFL800EP. Communication protocol Modbus (eng)
I589IGB08_22

FAQ for fire pump controllers FFL700EP, FFL800EP (eng)
F044IGB06_21

Certifications

Conformity

UNI EN 12845
IEC/EN 61010-1
IEC/EN 61010-2-030
IEC/EN 61000-6-2
IEC/EN 61000-6-3

Products > Fire pump controllers

FFL800EP

Compare

Controller for electric fire pumps in accordance with EN12845, power supply 24VAC/110…240VAC, built-in RS485, expandable with EXP... expansion modules

Type of product: Electric fire pump controller
Expandable: Yes
Rated supply voltage: 24VAC/110...240VAC
Display: LCD

Order code	FFL800EP
Weight [g]	1080
Qty. per package	1
Multiple qty. of packs per order	1
Package dimensions [mm]	315X190X060
Volume [cm³]	3591
Bar code [EAN13]	8013975232156
HS Code	85389091