Product designation				Soft Starter
Product type designation				ADX…B
Motor type				Asynchronous three phase
Electrical features
Supplies voltage
		Type of system		Three phase
		Rated supply voltage	V	208…500VAC
		auxiliary supply voltage (Us)		208…240VAC
		Rated frequency	Hz	50/60
Rated starter current Ie			A	142
Rated motor power
	IEC ratings (T≤40°C)
		230VAC	kW	37
		400VAC	kW	75
		500VAC	KW	90
	UL ratings (T≤40°C)
		220-240VAC	HP	50
		380-415VAC	HP	75
		440-480VAC	HP	100
Number of controlled phases			Nr.	3
Built-in bypass				Yes
Cooling System				Forced
Programming interface
Display				Backlit LCD 2x16 character
Programming with NFC technology				No
Optical port				No
Startup and stop settings
Startup method				Torque or voltage ramp with current limitation
Stop method				Torque ramp, voltage ramp, free-wheel stop
Braking method				DC dynamic with external relay
Protections
Auxiliary supply protection				Voltage too low
Power supply Protection				No power, phase loss, phase sequence, frequency out of limits, minimum and maximum voltage
Motor protection				Overload at starting (trip class 2, 10A, 10, 15, 20, 25, 30, 35 and 40), overload during running (trip class 2, 10A, 10, 15, 20, 25 and 30), locked rotor, current asymmetry, minimum torque (dry run),
Starter protection				Overcurrent, overtemperature, bypass failure, phase shorted, temperature sensor fault, maintenance request
Functions
Built-in bypass				3
Built-in display and keypad				Yes
Languages				Yes
View measurements				4
Torque control				Yes
Adjustable current limit				Yes
Dynamic braking				Yes
Kick Start function				Yes
Motor overload electronic protection				Yes
Motor protection PTC input				Yes
Protection against phase loss				Yes
Protection against phase inversion				Yes
Protection against locked rotor				Yes
Protection against thyristor overtemperature				Yes
Protection against low load				Yes
Programmable alarm				Yes
Digital inputs				Yes
Analog inputs				Yes
Digital outputs				Yes
Analog output				Yes
Monitoring communication				Yes
Optical port for programming				RS323
Event log				No
Motor hour counter				Yes
Startup counter				Yes
Clock calendar				Yes
Remote external keypad				Yes
Plug-in version				Optional
Input and Output
Digital inputs
		Number of digital input	Nr.	3 (2 digital inputs + 1 digital/analog input)
		Digital input type		24VDC (no need for external feeder)
		Digital input functions		1 input for start, 1 input programmable (stop, free-wheel stopping, external alarm, motor preheat, local control, alarms inhibit, manual resetting of motor thermal protection, keypad lock, second moto
Analog inputs
		Number of analog input	Nr.	1 (digital/analog)
		Analog input type		0-10VDC (0-20mA with external resistor 500Ω)
		Analog input functions		Motor protection via PTC probes, acceleration and/or deceleration ramp via analog input, analog input thresholds for motor starting and stopping, analog input thresholds for programmable relay enable
Digital outputs
		Number of digital output	Nr.	4
		Digital output arrangement		3 x 1 NO (SPST) + 1 C/O (SPDT) Ratings: 5A 250VAC AC1, 2A 250VAC AC15
		Digital output functions		C/O output for global alarm, 3 x 1NO outputs programmable (OFF, motor powered, up to speed, braking, current limit, service required, cascade starting, programmable input thresholds, alarm Axx)
Analog outputs
		Number of analog output	Nr.	1
		Analog output type		0...20mA, 4...20mA (0...10V with external resistor 500Ω)
		Analog output functions		Current, torque, motor thermal status, power factor and active power
Ambient conditions
Temperature
	Operating temperature
		min	°C	-10
		max	°C	+55°C (with current derating >45°C of 1.5%/°C )
	Storage temperature
		min	°C	-30
		max	°C	+70
Max altitude			m	1000 without derating (over 1000mt with current derating of 0.5%/100m)
Relative humidity			%	95% without condensation or dripping
Pollution degree				3
Housing
Mounting				Screw-fixing
IP degree of protection				IP00
Dimensions (W x H x D)			mm	273 x 600 x 285
Weight			Kg	28
ETIM classification
ETIM 8.0				EC000640 - Soft starter

Documents

Configuration software 51ADXSW

Certifications

EAC

Conformité

IEC/EN 60947-1
IEC/EN 60947-4-2

Produits > Démarreurs progressifs

51ADX0142B

Comparer

Démarreurs progressifs avec relais by pass intégré (Soft Starter) 142A 500V 3 phases

Type de produit: Version avancée, contrôle triphasé
Nombre de phases contrôlées: 3
Tension nominale de fonctionnement: 208…500VAC
Tension d'alimentation auxiliaire: 208…240VAC
Courant nominal du démarreur Ie [A]: 142
Puissance nominale du moteur 230VAC [kW]: 37
Puissance nominale du moteur 400VAC [kW]: 75
Puissance nominale du moteur 500VAC [KW].: 90
Fonctions: Protection thermique du courant moteur, démarrage avec limite de courant, contrôle du couple, kick start, freinage dynamique, entrée PTC, journal des événements, RS232

Code de commande	51ADX0142B
Poids [g]	28000
Quantité paquet produit	1
Quantité paquets multiples	1
Dimensions [mm] de l'emballage du produit	605X285X310
Volume [cm³]	53451,75
Code à barres [EAN13]	8013975075388
Code HS	85371098

Fiche Technique

Dimensions

Schéma électrique

51ADXTAST

Clavier à distance 96x96mm/3,8x3,8”, ACL rétroéclairé, 208 à 240VAC. Câble longueur 3m/3,3yd

SÉLECTIONNER VOTRE PAYS

Dimensions

Schéma électrique

Fiche Technique - 51ADX0142B

Documents

Catalogue

Brochures

Instructions techniques

CAD

Certifications

Software & upgrades

Certifications

Conformité

51ADX0142B

Produits et accessoires associés