Product designation				Micro PLC - Base module
Product type designation				LRD12TD024
Auxiliary supply voltage				24VDC
Number of inputs			Nr.	6 digital + 2 digital/analog
Number of outputs			Nr.	4 transistor
Max I/O number				12 (8 inputs + 4 outputs) up to 36 with LRE modules
Power supply
Rated auxil. supply voltage				24VDC
Operating voltage range				20.4...28.8VDC
Avarage current consumption			mA	125
Power consumption Max			W	4.5
Digital inputs
Number of digital input			Nr.	6 + 2 digital/analog
Rated voltage			V	24VDC
Input signals
		State 0 (OFF)		<5VDC
		State 1 (ON)		>15VDC
Response time
		0 to 1 (OFF-ON)		4ms (0.5ms for high speed)
		1 to 0 (ON-OFF)		4ms (0.3ms for high speed)
Analog inputs
Number of analog input			Nr.	2 digital/analog
Analog input type				Voltage inputs
Inputs signal range			V	0...10
Resolution				0.01V
Bit of conversion			bit	10
Current consumption at
		10VDC	mA	<0.17mA
Input impedance			kΩ	>40
Admissible overload			VDC	28
Sampling time			ms	5...20ms(LADDER); 2...10ms (FBD)
Maximum cable lenght			m / ft	≤30m/98ft (shielded wire)
Digital outputs
Number of digital output			Nr.	4
type				Transistor
System resources
Display				LCD display, 4 lines x 16 characters
Connections
Terminals type				Screw
Tightening torque for terminals
		max	Nm	0.6
		Max	Ibft	0.4
Conductor section
	AWG/Kcmil
		min		26
		max		14
	IEC
		min	mm²	0.14
		max	mm²	2.5
Ambient conditions
Temperature
	Operating temperature
		min	°C	-20
		max	°C	+55
	Storage temperature
		min	°C	-40
		max	°C	+70
Relative humidity			%	20...90% without condensation
Housing
Mounting				35mm DIN rail or screw fixing (M4x20mm)
Degree of protection				IP20
Dimensions (W x H x D)			mm	72 x 106 x 59.6
Weight			g	220
ETIM classification
ETIM 8.0				EC001417 - Logic module

Dokumenti

25 - Micro PLCs and HMI (eng)

Micro PLC Kinco (eng)
PD009GB10_11

Programming software for micro-plc LRD series

Certifikati

cULus
EAC

Sukladnosti

IEC/EN 61131-2
UL508
CSA C22.2 n° 142

Proizvodii > Mikro PLC-ovi i HMI

LRD12TD024

Usporedi

Micro PLCs, base module, auxiliary supply voltage 24VDC, 8/4 transistor

Type of product: Micro PLC base modules
Max I/O number: 12 (8 inputs + 4 outputs) up to 36 with LRE modules
Rated auxil. supply voltage: 24VDC
Type of built-in outputs: Transistor
Display: LCD display, 4 lines x 16 characters

Narudžbeni broj	LRD12TD024
Težina [g]	220
Količina u pakiranju	1
Grupnih pakiranja po narudžbi	1
Dimenzija pakiranja [mm]	080X100X066
Volumen [cm³]	528
Barkod [EAN13]	8013975147986
HS kod	85371091