Product designation				Level control relay for emptying or filling function. Multi voltage. Modular version
Product type designation				LVM25
Function				Emptying or filling
Auxiliary supply
Supply voltage Type				Multi voltage
Rated voltage Us				24…240VAC/DC
Operating voltage range				0.85...1.1 Us
Rated frequency			Hz	50/60
Power consumption Max			VA	3
Power dissipation Max			W	1.2
Output characteristics
Number of connectable electrodes			Nr.	3
Type of electrode				Electrode and electrode holders: SN1 / SCM / CGL / PS31 / PS3S or similar
Electrode voltage				10 Vpp
Sensitivity			kohm	2.5...100 adjustable
Time delay
Tripping time			s	≤1
Resetting time			s	≤1
Relay outputs
Number of relays			Nr.	1
Relay state				Normally de-energised, energises at tripping
Contact arrangement				1 changeover contact C/O-SPDT
Rated operational voltage AC (IEC)			VAC	250
Maximum switching voltage			VAC	400
IEC Conventional free air thermal current Ith			A	8
UL/CSA and IEC/EN 60947-5-1 designation				B300
Electrical life (with rated load)			cycles	10⁵
Mechanical life			cycles	30x10⁶
Indications
Indication				1 green LED for power on 1 red LED for relay state
Functions
3 detecting electrodes (MIN, MAX and COM)				Yes
5 detecting electrodes (MIN1, MAX1, MIN2, MAX2 and COM				No
Sensitivity adjustment 2.5...50k Ω				No
Sensitivity adjustment 2.5...100k Ω				Yes
Sensitivity adjustment 2.5...200k Ω				No
Adjustable sensitivity full-scale value 25-50-100-200 k Ω				No
Separate sensitivity adjustment for MAX probe (foam detection)				No
Emptying function				Yes
Filling function				Yes
Emptying function with MIN and/or MAX alarm				No
Filling function with MIN and/or MAX alarm				No
Emptying function with pump priority change				No
Filling function with pump priority change				No
Tank filling, well drawing and alarm				No
Filling-emptying adjustment selector				Yes
Programming selector for 5 different				No
Motor start-up priority change				No
Connections
Terminals type				Screw
Tightening torque for terminals
		max	Nm	0.8
		max	Ibin	7
Conductor cross section
	AWG/Kcmil
		min	AWG	24
		Max	AWG	12
	IEC
		min	mm²	0.2
		Max	mm²	4
Insulations
Rated insulation voltage Ui			V	240
Rated impulse withstand voltage Uimp			kV	4
Operating frequency withstand voltage			kV	2
Double insulation Supply / relay / electrode			VAC	≤250
Ambient conditions
Temperature
	Operating temperature
		min	°C	-20
		max	°C	+60
	Storage temperature
		min	°C	-30
		max	°C	+80
Housing
Execution				Modular DIN rail mounting
N° of modules				1
Material				Self-extinguishing polyamide
Mounting				35mm DIN rail (IEC/EN 60715) or by screws using extractable clips
IEC degree of protection				IP40 on front / IP20 on terminals
Dimensions (W x H x D)			mm	17.5 x 104.7 x 64.9
Weight			g	95
ETIM classification
ETIM 8.0				EC001447 - (Fill) level monitoring relay