Product designation				Variable speed drives
Product type designation				VLB1
General characteristics
Rated power supply voltage				200…240VAC 50/60Hz
Rated output current			A	7
Rated output power			kW	1.5
EMC filter				Built-in EMC suppressor cat. C1/C2
Technical features
Input type				Single-phase
Rated mains voltage			VAC	200…240
Operating mains voltage range			VAC	170…264
Rated mains frequency			Hz	50/60
Operating mains frequency range			Hz	45…65
Rated mains current without mains choke				16.7
Rated mains current with mains choke				13.9
Output type				Three-phase
Output voltage range			VAC	0…240
Output frequency range			Hz	0…599
Current overload			%/s	150% for 60s; 200% for 3s
Apparent output power				2.6
Power loss				4kHz: 43W
Brake chopper				Yes
Switching frequency				2…16kHz
Max motor cable length
	Shielded
		Without EMC category	m	50
		Category C1	m	3
		Category C2	m	20
		Category C3	m	35
	Unshielded
		Without EMC category	m	100
Functions
Motor control modes				V/f linear, V/f quadratic, V/f multipoint, sensorless vector control, ECO mode, servo control with encoder feedback, torque setpoint, sensorless control for synchronous motors
3-wire control				Yes
S-shape curves				Yes
Slip compensation				Yes
Flying restart				Yes
Access to DC bus				-
DC braking				Yes
DC injection at start				Yes
PID control				Yes
Sequencer (programmable frequency/time cycles)				Yes
Preset speeds				Yes
Motorpotentiometer				Yes
Different parameter configuration sets				Yes
Parameters changeover function				Yes
Favorite parameters menu				Yes
Autotuning				Yes
Safe torque Off (STO) safety function				Optional
PTC probe input				Yes
Protections				Overcurrent Output short circuit and earth/ground leakage Overvoltage Undervoltage Phase loss Motor heat overload (i2t) Overspeed Speed reverse
Special funct.				Multi-pump PID control (1 main pump frequency regulated + 2 auxiliary pumps activated in direct mode in case of necessity)
Input and Output
Number of digital input			Nr.	5
Digital input type				Selectable PNP or NPN logic
Number of digital output			Nr.	1
Digital output arrangement				1 relay output with changeover contact (C/O-SPDT) + 1 digital output
Output contacts ratings				Relay output: 3A 250VAC Digital output: 100mA max 30VDC
Number of analog input			Nr.	2
Analog input type				Configurable 0/2…10VDC, -10…+10VDC, 0…5VDC, 0/4…20mA
Number of analog output			Nr.	1
Analog output type				configurable as 0...10VDC, 0…5VDC, 2…10VDC, 0/4…20mA
Ambient conditions
Temperature
	Operating temperature
		min	°C	-10
		max	°C	+60 (with derating over +45°C)
		Current derating		Switching frequency 2 or 4kHz: 2.5%/°C over 45°C switching frequency 8 or 16kHz: 2.5%/°C over 40°C
	Storage temperature
		min	°C	-25
		max	°C	+60
Max altitude			m	4000m (over 1000m derate the rated current by 5%/1000m)
Maximum Pollution degree				2
Overvoltage category				III up to 2000m altitude (II above 2000m)
Housing
Installation position				Vertical
IP degree of protection				IP20
Dimensions (W x H x D)			mm	60 x 278 x 130
Weight			Kg	1.35
ETIM classification
ETIM 8.0				EC001857 - Frequency converter =< 1 kV

文档

New products 2023 (eng)

Variable speed drives VLB... Installation manual (eng)
I472IGB07_23
Variable speed drives VLB3. Instruction manual (eng)
I473GB01_24
Communication protocol (CANOPEN, Modbus-RTU, Profibus, PROFINET, ETHERCAT) for VLB3 variable speed drives (eng)
I488GB01_24

UL 证书
E360929

Firmware and drivers for VLBXSW software

认证

cULus
RCM

符合

EN/BS 61800-5-1
UL 61800-5-1
CSA 22.2 No. 274

产品 > 交流变频器

VLB115A240XX

对比

Power unit, VLB1... type, single-phase supply 200-240VAC 50/60Hz. EMC suppressor built-in, 1.5kW

Type of product: Variable speed drives
Input type: Single-phase
Rated power supply voltage: 200…240VAC 50/60Hz
Rated output current: 7
Rated output power: 1.5
Housing: Book housing

订购代码	VLB115A240XX
重量（g）	1350
产品包装数量	1
订单包装数量	1
产品包装尺寸（毫米）	285X160X075
体积[立方厘米]	3420
条形码（EAN13)	8013975319062
HS 代码	85044095